These pins are perfect for your grass protection needs.
The post Pins (Grass Reinforcement Accessories) appeared first on Mesh4.
]]>
The post Pins (Grass Reinforcement Accessories) appeared first on Mesh4.
]]>
[accordion title="Features & Applications"]
[accordion-item title="Features"]
- UV Stabilised
- Cost effective in comparison to wire and
chain-link products - Excellent long lasting colour fastness
- Manufactured from HDPE (Non-toxic polymer)
- Rot proof
[/accordion-item]
[accordion-item title="Applications"]
- Fence for Gardens or Vegetable patches
- Can be used as climbing plant support and crop protection
- Perimeter Fencing
- Pet enclosures
[/accordion-item]
[/accordion]
The post Square Mesh (Plastic Garden Fence) appeared first on Mesh4.
]]>The post Square Mesh (Plastic Garden Fence) appeared first on Mesh4.
]]>Excellent temporary fencing solution for almost any industry.
Dimensions: 1.2m x 50m roll
Weight: 7.2kg nett
Thickness: 120gr/m2
The post Blue Barrier Fence appeared first on Mesh4.
]]>
HPP – Homopolymer polypropylene
A Light material, resistant to chemical substances (as salts, acids and strong alkalis) and with a high mechanical strength. It is used for bi-oriented (stretched) products. Suitable for direct food contact.
Specific weight: 0.9-0.915 g/cm3 (56.19-57.12 lb/ft3)
Melting temperature: 162-168°C (323.6-334.4°F)
Tensile strength: 34-37 MPa
Young’s modulus: 1200-2000 Pa
Yield elongation: 5-10%
Break elongation: 500-700%
Working temperature: +0°C – +90°C (32°F – 194°F)
Max working temperature (short period): +100°C (212°F)
CPP – copolymer polypropylene
Slightly softer and more resistant to high temperature than the homopolymer and with similar mechanical features. Suitable for direct food contact.
Specific weight: 0.895-0.9 g/cm3 (54.62-56.19 lb/ft3)
Melting temperature: 135-168°C (275-334.4°F)
Tensile strength: 25-30 MPa
Young’s modulus: 1000 Pa
Yield elongation: 5-10%
Break elongation: >500%
Working temperature: -20°C – 70°C (68°F – 158°F)
Max working temperature (short period): +80°C (176°F)
PA6 (Nylon) -Polyamide 6
It is an advanced polymer able to stand high temperatures and direct contact with oil, grease, fuel and other solvents. It shows a low friction coefficient and is resistant to abrasion, shocks and fatigue.
Specific weight: 1.12-1.14 g/cm3 (69.91-71.16 lb/ft3)
Melting temperature: 220-225°C (428-437°F)
Tensile strength: 80 MPa (dry) –55 MPa (wet)
Break elongation: 20-40% (dry) – 100% (wet)
Working temperature: -40°C – 105°C (-40 – 221°F)
Max working temperature (short period): 170°C (338°F)
The post Automotive Protection & Reinforcement Nets appeared first on Mesh4.
]]>
The post Automotive Protection & Reinforcement Nets appeared first on Mesh4.
]]>
The usual layer-configuration of a composites mould includes the following items: the reinforcement fibres, the “peel ply” (to help the adhesion and the after-work separation), the flow media mesh and the bagging film with the nozzle to inject the resin. Once the air inside the bag is drawn out, the epoxy constituent can flow inside. Due to the channels within the grid mesh, the fluid then covers all the fields of the composite surface with no risk of inconsistency or voids in the final product.
Dual-Flat-Netting
The usage of this kind of grid allows the uniform distribution of mechanical and geometrical features throughout the mould and maintains the flow speed under control.
Dual-flat netting is used in applications such as Hydro wind turbines, light plane wings and boat hulls, where the end product is subject to a high mechanical stress rate.
BI-Planar Extruded Meshes
OS Flat Nets: PP & PA meshes
Bi-planar (dual flat) extruded nettings with a rhomboidal (diamond) mesh are commonly used as support or spacer between membranes and films. Their specific geometry creates channels where any fluid manages to flow much easier.
The post Flow Media for Resin Infusion appeared first on Mesh4.
]]>
The post Flow Media for Resin Infusion appeared first on Mesh4.
]]>Many single-use accessories like wipes, gauzes and nappies can be reinforced using light weight stretched polypropylene grids. TENAX products offer an outstandingly high transpiration ratio and are waterproof to any kind of fluid.
Light material, resistant to chemical substances (as salts, acids and strong alkalis) and with a high mechanical strength. It is used for bi-oriented (stretched) products. Suitable for direct food contact.
[accordion title="Features & Applications"]
[accordion-item title="Features"]
- Dimensional stability and consistency
- High mechanical resistance
- Flexibility
- Tear resistant
- Recyclable and incinerable material
- Light weight
[/accordion-item]
[accordion-item title="Applications"]
- Industrial fabrics, laminated composites, plastic, paper and for the structural support of polyurethane seats for cars, trains and planes
[/accordion-item]
[/accordion]
HPP – Homopolymer polypropylene
A Light material, resistant to chemical substances (as salts, acids and strong alkalis) and with a high mechanical strength. It is used for bi-oriented (stretched) products. Suitable for direct food contact.
Specific weight: 0.9-0.915 g/cm3 (56.19-57.12 lb/ft3)
Melting temperature: 162-168°C (323.6-334.4°F)
Tensile strength: 34-37 MPa
Young’s modulus: 1200-2000 Pa
Yield elongation: 5-10%
Break elongation: 500-700%
Working temperature: +0°C – +90°C (32°F – 194°F)
Max working temperature (short period): +100°C (212°F)
The post Medical & Hygiene appeared first on Mesh4.
]]>
[accordion title="Features & Applications"]
[accordion-item title="Features"]
- Manufactured to ISO9001 standards
- High tensile polypropylene
- Chemically inert
- Suitable for food use
[/accordion-item]
[accordion-item title="Applications"]
- Industrial fabrics
- Laminated composites
[/accordion-item]
[/accordion]
HPP – Homopolymer polypropylene
A Light material, resistant to chemical substances (as salts, acids and strong alkalis) and with a high mechanical strength. It is used for bi-oriented (stretched) products. Suitable for direct food contact.
Physical & mechanical features
Maximum width: 6,00 m
Minimum thickness: 0,23 mm
Maximum thickness: 0,70 mm
Working min. Temperature: -20°C
Working max. Temperature: +120°C
Colour: clear/ customized
Mesh: square
Minimum weight: 5 g/m2
The post Light Weight Nets appeared first on Mesh4.
]]>
The post Light Weight Nets appeared first on Mesh4.
]]>TENAX extruded bi-oriented nets have many applications as reinforcement in the production of industrial fabrics, laminated composites, plastic, paper and for the structural support of polyurethane seats for cars, trains and planes. Unlike woven structures, extruded bioriented nets have the clear advantage of being ladder-proof and maintain high dimensional stability throughout the production process.
The molecular orientation process enables certain products to achieve uniform mechanical characteristics. We can manufacture net products larger than 4 metres in width, so that the performance of the finished product is not restricted.
[accordion title="Features & Applications"]
[accordion-item title="Features"]
- Dimensional stability and consistency
- High mechanical resistance
- Flexible, Light weight and Tear resistant
- Recyclable and incinerable material
[/accordion-item]
[accordion-item title="Applications"]
- Industrial fabrics,
- Laminated composites,
- Plastic, paper
- Structural support of polyurethane seats for cars, trains and planes
[/accordion-item]
[/accordion]
HPP – Homopolymer polypropylene
A Light material, resistant to chemical substances (as salts, acids and strong alkalis) and with a high mechanical strength. It is used for bi-oriented (stretched) products. Suitable for direct food contact.
Specific weight: 0.9-0.915 g/cm3 (56.19-57.12 lb/ft3)
Melting temperature: 162-168°C (323.6-334.4°F)
Tensile strength: 34-37 MPa
Young’s modulus: 1200-2000 Pa
Yield elongation: 5-10%
Break elongation: 500-700%
Working temperature: +0°C – +90°C (32°F – 194°F)
Max working temperature (short period): +100°C (212°F)
The post Paper & Nonwoven Products appeared first on Mesh4.
]]>
The post Paper & Nonwoven Products appeared first on Mesh4.
]]>TENAX offers many solutions to control and protect the external outer side of the filter media. The replacement of sheet metal with a plastic sleeve or a flat net, allows the incineration of cartridges after their use. This saves time and money for disassemble and separates the filter components. TENAX products can be used in a myriad of industrial process, as they are completely suitable for ultrasound or low temperature welding. The products can also be supplied with a flame retardant additive.
[accordion title="Features & Applications"]
[accordion-item title="Features"]
- Manufactured to ISO 9001 Standards
- Available in Polypropylene (PP) or Nylon (PA6)
- Replacement for sheet metal is cost effective
- Ultrasonic welding capability
[/accordion-item]
[accordion-item title="Applications"]
- Flat Nets can be used as a single or dual layer for support and pleating of media filters
- Industrial Filter Cartridges
- Air Cabin Filters (Dust)
- Liquid Filtration
- Oil Filtration (Nylon based flat nets)
[/accordion-item]
[/accordion]
The post Filter Outer Protection appeared first on Mesh4.
]]>
The post Filter Outer Protection appeared first on Mesh4.
]]>For reverse osmosis and ultra-filtration, TENAX has its range of flow spacers for membranes. These are dual-flat rhomboidal nets, and can be manufactured to suit the client. The flat mesh has a minimum thickness of 0.65 mm and mesh size of 2.6MM x 1.90MM. TENAX spacers, named as OS products, are certified for direct food contact according to EU Reg. 10/2011 and American FDA.
[accordion title="Features & Applications"]
[accordion-item title="Features"]
- Manufactured from polypropylene
- Direct food contact approved EU Reg. 10/2011
- ISO9001 certified
[/accordion-item]
[accordion-item title="Applications"]
- Used within filtration units for reverse osmosis
[/accordion-item]
[/accordion]
The post Draining Spacers for Reverse Osmosis appeared first on Mesh4.
]]>The post Draining Spacers for Reverse Osmosis appeared first on Mesh4.
]]>